Αυτός ο ιστότοπος χρησιμοποιεί cookie από την Google για να παρέχει τις υπηρεσίες του και να αναλύει την επισκεψιμότητα. Η IP διεύθυνσή σας γνωστοποιείται στην Google, μαζί με μετρήσεις απόδοσης και ασφαλείας, ώστε να διασφαλιστεί η ποιότητα της υπηρεσίας, για τη δημιουργία στατιστικών στοιχείων σχετικά με τη χρήση και για τον εντοπισμό και την αντιμετώπιση καταχρήσεων. Με την χρήση του ιστότοπου Audiohub.gr αποδέχεστε τα παραπάνω.

Plinius Audio

User avatar
Gojakla
Contributor
Posts: 1754
Joined: Tue Mar 29, 2016 10:56 am

Plinius Audio

Unread post #1 by Gojakla » Tue Jun 28, 2016 5:04 pm

Plinius_Intro.jpg
Plinius_Intro.jpg (161.57 KiB) Viewed 5077 times


Official Site



OVERVIEW*

Mr. Willoughby -Plinius Audio Chief Executive- about Plinius history: "Plinius was founded in 1980
by a chap called Peter Thompson. To make things more difficult, transistors were a new technology
and the quality wasn't often very high. There were also import restrictions and that made any kind
of kit that was moderately expensive, very expensive." This led to the formation of about a dozen
high-end manufacturers in a country with, "only three million people and seventy million sheep."
Toward the end of the 1980"s import restrictions were lifted and that saw the demise of quite a few of those companies. In fact, Plinius is one of two that survived, and by far the largest.

Brian-Willoughby.jpg
Brian-Willoughby.jpg (408.45 KiB) Viewed 5077 times


According to Willoughby, "Where I think it's going to go, the server is one area of the technology
that's going to get better so the storage is going to be better used. The library management
software on the storage is also going to get better. And for Plinius, our game is to have a window
into that, which is our app that allows you to look at that file structure and see it in a structure that
is good to read. And it's in making sure that we take the signal, render it well, and put it into a good
DAC. That's the part where Plinius has got to concentrate."

"If you're going to be a Plinius user you're going to have a certain profile. You're going to value some
of the nice things in life. You're going to have an appreciation for the aesthetics. That's going to be
important. You're going to want to be dealing with a company that's not pretentious.
As Kiwi's, we're not ostentatious. We're not over the top in any of our presentation stuff.
And our products reflect that. And you'll be a person that values that.
That'll be the thing that makes you choose Plinius."


Plinius_Quote.jpg
Plinius_Quote.jpg (154.43 KiB) Viewed 5077 times



INTEGRATED AMPLIFIERS

Integrated amplifiers have a smaller footprint than separate components
and they are more economical to make because they combine both the preamp
and power amp stages into the same chassis.

Plinius has for years had a great reputation for producing great, highly regarded
amplifiers in this category. The current range has exceptional award winning pieces
that can drive any speakers and will grace any listening environment with their lustrous
finish and simple elegance.



HIATO

With 300 watts per channel the Hiato integrated stereo amplifier is a serious piece of
equipment capable of driving big, difficult to drive speakers. It masters complex musical
pieces that many dedicated power amps struggle with to give you spine tingling detail
in the treble and control over the bass and mid range that is a pure delight.

The rear panel layout includes four line level inputs and a user adjustable phono input.
High quality WBT RCA connectors are used on all line level and phono inputs with additional
balanced XLR inputs for CD and Line 1. It has RCA and XLR HT bypass input, remote IR input
and 12V input/output triggers. There are four pairs of output connectors allowing bi-wired
speaker applications, line level output for archiving and pre-out for bi-amping.
The phono stage is optional.

SPECS

POWER
300 watts RMS per channel into 8 ohms
450 watts RMS per channel into 4 ohms
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
-3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping

CURRENT OUTPUT
50A short duration peak per channel
Fuse protected

SLEW RATE
Typically 5µs

HUM & NOISE
90dB below rated ouput 20Hz to 20kHz unweighted

POWER/CURRENT CONSUMPTION
800W
0.6A (138W) Class AB Idle
0.3A (69W) Standby

OPTIONAL PHONO INPUT
RCA Unbalanced

INPUT CAPACITANCE
100pF

ADJUSTABLE GAIN
50dB, 56dB, 60dB, 66dB

ADJUSTABLE LOAD
47k ohms, 470 ohms, 100 ohms, 47 ohms, 22 ohms


Hiato_Photo01.jpg
Hiato_Photo01.jpg (229.97 KiB) Viewed 5077 times


Hiato_Photo02.jpg
Hiato_Photo02.jpg (177.62 KiB) Viewed 5077 times


Hiato_Photo03.jpg
Hiato_Photo03.jpg (264.92 KiB) Viewed 5077 times




HAUTONGA

The rear panel has five line level RCA inputs with Phono RCA and a balanced XLR pair additional
as standard. There is a Pre Out for those that only want to use the pre-amp stage and the Line Out
connection for archiving or other ancillary equipment. Trigger in and out connectors provide for
multi-room or home theatre simplicity.

A full function remote lets you scroll through inputs from your seat. HT Bypass, standby mode for
true low power operation that keeps the circuit active to deliver peak performance with minimal
delay, mute and volume controls, display brightness adjustment and the full complement of CD
player functions are all available from the remote.

Careful attention has been paid to signals and circuit layout with short signal paths, optimal
component placement and wiring specification working in harmony to extract exciting depth
and detail from any musical recording.

SPECS

POWER
200 watts RMS per channel into 8 ohms.
280 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
-3dB at 5Hz and -3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

CURRENT OUTPUT
40A short duration peak per channel
Fuse protected

SLEW RATE
50V/µs

HUM & NOISE
90dB below rated output 20Hz to 20kHz unweighted

INPUT IMPEDENCE
47k ohms all inputs

RATED PRE OUT LEVEL
1.5V RMS into 47k ohms or higher

PRE OUT SOURCE IMPEDENCE
Typically 1.5k ohms

PRE OUT MINIMUM RECOMMENDED LOAD
47k ohms

LINE OUT LEVEL
190mV at 200 ohms

GAIN
Line inputs to speaker out: 40dB
Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain

POWER/CURRENT CONSUMPTION
600W
0.4A (92W)
Class AB Idle 0.14A (32W) Standby


Hautonga_Photo01.jpg
Hautonga_Photo01.jpg (230.8 KiB) Viewed 5077 times


Hautonga_Photo02.jpg
Hautonga_Photo02.jpg (140 KiB) Viewed 5077 times


Hautonga_Photo03.jpg
Hautonga_Photo03.jpg (202.89 KiB) Viewed 5077 times




INSPIRE 880

This versatile 80 watt per channel integrated amplifier goes a step further than traditional
integrated products and gives you enhanced listening from almost any source.
The Inspire 880 will accept signals from your CD player, your personal computer,
your AV source and even vinyl from your turntable.

To listen to stored digital files all you need do is connect your music collection to your
Inspire 880 via the USB input. You then use your media player to select what you want
to play and stream it to your Inspire 880 which converts the digital signal to the analogue
signal your speakers need. In no time at all you can be up and running with Plinius clarity
refinement and power.

SPECS

POWER
80 watts RMS per channel into 8 ohms.
100 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

DAC CAPABILITY
24 bit, 192ks/s

CONNECTIVITY
USB asynchronous
Optical Toslink

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
-3dB at 5Hz and -3dB at 300kHz

DISTORTION
Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

CURRENT OUTPUT
16A short duration peak per channel
Fuse protected

HUM & NOISE
90dB below rated output 20Hz to 20kHz unweighted

INPUT IMPEDENCE
10k ohms for line inputs

GAIN
Line inputs to speaker out: 38dB
Phono Input to speaker out: 50dB

POWER/CURRENT CONSUMPTION
300W
Class AB Idle 0.14A (32W) Standby


Inspire880_Photo01.jpg
Inspire880_Photo01.jpg (186.58 KiB) Viewed 5077 times


Inspire880_Photo02.jpg
Inspire880_Photo02.jpg (109.52 KiB) Viewed 5077 times


Inspire880_Photo03.jpg
Inspire880_Photo03.jpg (143.2 KiB) Viewed 5077 times




INSPIRE 980

The 80 watt per channel Inspire 980 has all the versatility of the Inspire 880 that allows you
to directly connect up almost any source from a CD player, your personal computer, your
AV source or turntable. The Inspire 980 adds the further feature of networking capability
via wired or wireless Ethernet and this allows you to directly access your music library
stored on a networked drive.

Various network controllers can be used to control playback but for the ultimate in refinement
of interfaces the Plinius Arataki can’t be beaten. The Arataki app for iPad was developed
to control network playback via our premium Tiki and Toko products but it can also be used
with the Inspire 980.

SPECS

POWER
80 watts RMS per channel into 8 ohms.
100 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

SUPPORTED AUDIO FILE SERVER
DLNA Digital Media Servers

SUPPORTED PLAYBACK CONTROL
DLNA Digital Media Controllers
DLNA Mobile Digital Media Controllers
UPnP smartphone applications
iPad/iPod applications

DAC CAPABILITY
24 bit, 192ks/s

AUDIO CODEC SUPPORT
FLAC (up to 24/192), LPCM (up to 24/192), ALAC,AIFF, MP3

CONNECTIVITY
10/100 Ethernet
Wi-Fi
USB asynchronous
Optical Toslink

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
-3dB at 5Hz and -3dB at 300kHz

DISTORTION
Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

HUM & NOISE
90dB below rated output 20Hz to 20kHz unweighted

POWER/CURRENT CONSUMPTION
300W
Class AB Idle 0.14A (32W) Standby


Inspire980_Photo01.jpg
Inspire980_Photo01.jpg (186.52 KiB) Viewed 5077 times


Inspire980_Photo02.jpg
Inspire980_Photo02.jpg (110.85 KiB) Viewed 5077 times


Inspire980_Photo03.jpg
Inspire980_Photo03.jpg (145.1 KiB) Viewed 5077 times




--------------------------------------------------------------------------------------------------------



POWER AMPLIFIERS

Years of experience designing amplifiers and listening to what our customers want
has resulted in products that deliver pure distortion free amplification that allows
even the most difficult to drive speakers achieve their best performance.

From the unsurpassed Class A Reference with its high current delivery through to the
more understated Class AB units there is a product in our line up to satisfy your needs.



SA - REFERENCE

Designed to work as either a monoblock, or a stereo amplifier. They are truly a masterpiece
of design and they display the very best craftsmanship in their build quality.

As a bridged monoblock the SA-Reference will exceed 1kW of pure balanced amplification
and in balanced XLR mode operates as a true balanced amplifier from input to output.
Premium components have been used throughout and Class A operation is maintained
to over 100 Watts per Channel while 300 Watts is available in both Class A and Class AB stereo mode.

SPECS

POWER
300 watts RMS per channel into 8 Ohms
450 watts RMS per channel into 4 Ohms
Both channels driven from 20Hz to 20kHz
at less than 0.05% total harmonic distortion.

MONO OUTPUT
1000 watts RMS into 8 Ohms
1800 watts RMS into 4 Ohms
20Hz to 20kHz

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
0dB at 1Hz and -3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping

CURRENT OUTPUT
100A short duration peak per channel
Fuse protected

RISE TIME
Typically 5µs

HUM & NOISE
100dB below rated output 20Hz to 20kHz, A weighted

INPUT IMPEDENCE
47k ohms

GAIN
RCA Inputs: 32dB
Balanced Inputs: 38dB

POWER/CURRENT CONSUMPTION
1400W
4.8A (1100W) Class A Idle
0.8A (184W) Class AB Idle/Standby


SA-Reference_Photo01.jpg
SA-Reference_Photo01.jpg (257.42 KiB) Viewed 5077 times


SA-Reference_Photo02.jpg
SA-Reference_Photo02.jpg (207.49 KiB) Viewed 5077 times


SA-Reference_Photo03.jpg
SA-Reference_Photo03.jpg (268.08 KiB) Viewed 5077 times




SA 103

The PLINIUS SA-103 stereo amplifier is a Class A amplifier capable of delivering up to 125 watt
per channel in both Class A and Class AB mode. Bridged Mono RCA and Balanced Mono XLR circuits
used in the SA103 allow Monoblock operation delivering in excess of 400 watts.

Plinius' distinctive heatsink profile has allowed us to maintain the classic look and produce an
amplifier capable of operating in Class A without the use of troublesome fans or other methods
used for cooling. Its 500mm by 455mm footprint belies the power it produces and these units sit
comfortably beside big speakers, understating somewhat their contribution to the speakers' performance.

SPECS

POWER
125 watts RMS per channel into 8 ohms
220 watts RMS per channel into 4 ohms
Both channels driven from 20Hz to 20kHz
at less than 0.05% total harmonic

MONO OUTPUT
400 watts RMS into 8 ohms
730 watts RMS into 4 ohms
20Hz to 20kHz

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
0dB at 1Hz and -3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping

CURRENT OUTPUT
50A short duration peak per channel
Fuse protected

RISE TIME
Typically 5µs

HUM & NOISE
100dB below rated output 20Hz to 20kHz, A-weighted

INPUT IMPEDENCE
47k ohms

GAIN
RCA Inputs: 32dB
Balanced Inputs: 38dB

POWER/CURRENT CONSUMPTION
700W
2.1A (485W) Class A Idle
0.4A (92W) Class AB Idle/Standby


SA-103_Photo01.jpg
SA-103_Photo01.jpg (269.1 KiB) Viewed 5077 times


SA-103_Photo02.jpg
SA-103_Photo02.jpg (180.05 KiB) Viewed 5077 times


SA-103_Photo03.jpg
SA-103_Photo03.jpg (234.44 KiB) Viewed 5077 times




SB 301

For the technically minded the SB-301 is a Class AB two channel amplifier that delivers over
300 watts per channel at 8 ohms.

The physical construction of the SB-301 is based on the SA series designs so it has the same
distinctive aesthetic as the Class A products and indeed much of the electronics topology is
derived from that Class A history.

SPECS

POWER
310 watts RMS per channel into 8 ohms.
470 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE
20Hz to 20kHz ±0.2dB
-3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.1% THD and IM worst case prior to clipping

CURRENT OUTPUT
100A short duration peak per channel
Fuse protected

RISE TIME
Typically 5µs

PHASE RESPONSE
+0° at 20Hz and -14° 20kHz

HUM & NOISE
100dB below rated output 20Hz to 20kHz, A-weighted

INPUT IMPEDENCE
47k ohms

GAIN
RCA Inputs: 32dB
Balanced Inputs: 38dB

POWER/CURRENT CONSUMPTION
900W
1.6A (370W) Class AB Idle
0.2A (46W) Standby


SB-301_Photo01.jpg
SB-301_Photo01.jpg (249.24 KiB) Viewed 5077 times


SB-301_Photo02.jpg
SB-301_Photo02.jpg (181.23 KiB) Viewed 5077 times


SB-301_Photo03.jpg
SB-301_Photo03.jpg (233.92 KiB) Viewed 5077 times




P10

The large toroidal transformer will allow the P10 to deliver power levels in excess of 200 watts per
channel into 8 Ohms. Difficult speaker loads are driven with ease to the most satisfying levels,
while maintaining control and finesse.

Partnered with the Plinius Kaitaki preamplifier these stable mates will combine to perform at the
highest level. The P10 is also highly suited to multiple custom installation use featuring a Home
Theatre trigger bypass.

SPECS

POWER
200 watts RMS per channel into 8 ohms.
300 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz
at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE
20Hz to 20kHz +/–2dB
-3dB at 5Hz and –3dB at 70kHz

DISTORTION
Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

CURRENT OUTPUT
40A short duration peak per channel
Fuse protected

SLEW RATE
50V/µs

HUM & NOISE
90dB below rated output 20Hz to 20kHz unweighted

INPUT IMPEDENCE
47k ohms

GAIN
RCA Inputs: 32dB
XLR Inputs: 38dB

POWER/CURRENT CONSUMPTION
600W
0.4A (92W)
Class AB Idle
0.14A (32W) Standby


P10_Photo01.jpg
P10_Photo01.jpg (229.9 KiB) Viewed 5077 times


P10_Photo02.jpg
P10_Photo02.jpg (137.71 KiB) Viewed 5077 times


P10_Photo03.jpg
P10_Photo03.jpg (185.37 KiB) Viewed 5077 times




--------------------------------------------------------------------------------------------------------



PRE AMPLIFIERS

Plinius' well proven and reliable preamplifier circuit designs do a great job of protecting the tiny
signals from your source components and presenting the power amp with a clean distortion free signal.

As well as managing the delicate signals from the source the preamplifier is a routing and control
centre for the music system and excellence here allows the power amps in the system to faithfully
drive the speakers to evoke all the emotions the artists have poured into their work.



TAUTORO

There are balanced XLR and unbalanced RCA connection to the 5 line inputs, home theatre bypass
loop and dual outputs for bi-amping or multi room installations. There is also an opportunity for an
optional phono input to be added in place of one line input.

With a host of features including individual source selection, headphone output, line level source
output for archiving and remote trigger in/out for integration into a semi automated system, the
Tautoro will comfortably support any combination of power amplifiers you have in your system.

SPECS

FREQUENCY RESPONSE
20Hz to 20kHz +/- 0.2dB

DISTORTION
<0.05% THD at rated input level

HUM & NOISE
-80dB at rated input level, A weighted

INPUT SENSITIVITY FOR RATED OUTPUT
125mV RMS Unbalanced Inputs
62mV RMS Balanced Inputs

INPUT IMPEDENCE
50k ohms

RATED OUTPUT LEVEL
500mV RMS into 10k ohms or higher

POWER/CURRENT CONSUMPTION
50W
0.12A (28W) Idle/Standby

OPTIONAL PHONO INPUT
RCA Unbalanced Input

ADJUSTABLE GAIN
50dB, 56dB, 60dB, 66dB

ADJUSTABLE LOAD
47k ohms, 470 ohms
100 ohms, 47 ohms
22 ohms
within RIAA spec


Tautoro_Photo01.jpg
Tautoro_Photo01.jpg (193.03 KiB) Viewed 5077 times


Tautoro_Photo02.jpg
Tautoro_Photo02.jpg (161.86 KiB) Viewed 5077 times


Tautoro_Photo03.jpg
Tautoro_Photo03.jpg (251.01 KiB) Viewed 5077 times




KAITAKI

Visible controls on the Kaitaki are the rotary volume knob and source selection buttons with all
other functions driven from the distinctive Plinius remote control. LED indicators on the front panel
display demonstrate the source selected and status of the mute, phase and HT bypass functions.

The Kaitaki will allow the connection of up to 5 source components including both balanced and
single ended connection for CD. A processor loop allows integration with a home theatre system
and output is available from RCA or XLR connectors. The optional adjustable phono stage model
allows enjoyment of vinyl at a sophisticated level without the need to purchase a specialised phono preamplifier.

SPECS

FREQUENCY RESPONSE
20Hz to 20kHz +/- 0.2dB

SIGNAL TO NOISE RATIO
-80dB at rated input level, A weighted

DISTORTION
<0.05% THD at rated input level

INPUT SENSITIVITY FOR RATED OUTPUT
125mV RMS Unbalanced Inputs
62mV RMS Balanced Inputs

INPUT IMPEDENCE
50k ohms

RATED PRE OUT LEVEL
500mV RMS into 10k ohms or higher

PRE OUT MINIMUM RECOMMENDED LOAD
47k ohms

LINE OUT LEVEL
190mV at 200 ohms

OUTPUT SOURCE IMPEDENCE
Typically 100 ohms

GAIN
Line Ampilfier: 12dB

POWER/CURRENT CONSUMPTION
40W
0.10A (23W) idle/standby

INPUT CAPACITANCE
100pF

ADJUSTABLE GAIN
60dB, 66dB

ADJUSTABLE LOAD
47k ohms
470 ohms
100 ohms
47 ohms
22 ohms


Kaitaki_Photo01.jpg
Kaitaki_Photo01.jpg (201.89 KiB) Viewed 5077 times


Kaitaki_Photo02.jpg
Kaitaki_Photo02.jpg (125.65 KiB) Viewed 5077 times


Kaitaki_Photo03.jpg
Kaitaki_Photo03.jpg (164.79 KiB) Viewed 5077 times







* Parts taken from Paul Wilson's interview at AudiophileReview.com
User avatar
Gojakla
Contributor
Posts: 1754
Joined: Tue Mar 29, 2016 10:56 am

Re: Plinius Hiato Integrated Amplifier

Unread post #2 by Gojakla » Tue Jun 28, 2016 5:11 pm

Ο Hiato είναι ένα απο τα μηχανάκια που πολύ θα ήθελα να έχω στην κατοχή μου.
Τα οικονομικά δεν έφταναν μέχρι εκεί βεβαίως, οπότε "συμβιβάστηκα" στο μικρό αδερφό "9200".

Έχοντας λοιπόν τον 9200 αρκετό καιρό πια, τείνω να συμφωνήσω με τον Neil Gader του The Absolute Sound, όταν μιλάει για συγκρατημένα πλούσιες μεσαίες, καλό έλεγχο των χαμηλών και εξαιρετική έκταση ψηλά.

Ήχος με "κλίση" προς το γλυκό κομμάτι του ουδέτερου θα έλεγα συμπερασματικά.


Θα με ενδιέφεραν επόψεις και άλλων μελών που είχαν την ευκαιρία να ακούσουν έναν Νεο Ζηλανδό...

[afro]
User avatar
Dr Pan K
Site Admin
Posts: 7870
Joined: Tue Mar 29, 2016 12:46 am

Re: Plinius Audio

Unread post #3 by Dr Pan K » Fri Jul 01, 2016 12:38 am

H Plinius ειναι μια απο τις πιο σοβαρές προτάσεις στην μεσαία κατηγορία ή αν θελουμε στα entry level high end καθώς εδω και αρκετά χρόνια εχει διακριθεί για την αξιοπιστία και τον μουσικο χαρακτήρα της. Το εσωτερικό των ενισχυτων μάρτυρα της πολυ καλη ποιότητα κατασκευής, την ορθολογική διαταξη των κυκλωμάτων και την προσοχη στις λεπτομέρειες.

Ο 9200 ειχε κανει μια σύντομη επισκεψη στο συστημα μου και δεν ειχε κανενα προβλημα να οδηγησει τα αρκετα απαιτητικα ηχεια μου (ATC 100SL). Σε σχεση με τον ASR emitter ισως να υπολειπόταν λιγο σε ελεγχο και ταχύτητα χαμηλα, οχι κατι το σοβαρο πάντως. Η μεσαία περιοχη του 9200 ηταν ζεστη και μελωδική, το ιδιο θα ελεγα οτι ισχυει γενικότερα για την εταιρεία.

Μέρος του ονόματός της η Plinius το οφειλει στους μεγάλους τελικούς της οι οποίοι εχουν δυνατότητα να παίζουν είτε σε τάξη ΑΒ ειτε σε καθαρή Α. Ο SA-103 μπορει να θεωρηθεί σαν ενα πολυ καλο value for money γιατι εχει τα παντα, ηχο-punch-ποιοτητα κατασκευής και τιμη. Μονο μειονέκτημα που διαφοροι φιλοι χρηστες ανεφεραν ηταν οτι σε ταξη Α ανεβαζε ιδιαίτερα μεγαλες θερμοκρασίες, ειδικα εδω στην Ελλαδα το καλοκαίρι τα κυκλώματα υπέφεραν αρκετα.

Αν και πριν λιγα χρονια εχασε 2 απο τους βασικούς σχεδιαστές της η εταιρεία δεν δειχνει να χανει την επαφη με τις εξελίξεις. Πρόσφατα προσέθεσε ψηφιακές πηγες και streamer στην γκάμα της καθως και DAC στους νεοτερους ολοκληρωμένους ενισχυτές.

DSC03473.JPG
DSC03473.JPG (1.14 MiB) Viewed 5069 times


DSC03471.JPG
DSC03471.JPG (1.06 MiB) Viewed 5069 times
Παναγιώτης
User avatar
amanida
Posts: 26
Joined: Wed May 03, 2017 7:11 pm

Re: Plinius Audio

Unread post #4 by amanida » Sat May 06, 2017 8:17 pm

Ωραία η παρουσίαση των μοντέλων της εταιρίας καθώς και η παράθεση ακουστικών εντυπώσεων.
Λείπει μόνο το Koru, το phono που βγάζει η εταιρία. Ο ήχος των ενισχυτικών plinius χαρακτηρίζεται to the warm side of neutral.
User avatar
Gojakla
Contributor
Posts: 1754
Joined: Tue Mar 29, 2016 10:56 am

Re: Plinius Audio

Unread post #5 by Gojakla » Sat May 06, 2017 10:00 pm

Θα συμφωνησω στον χαρακτηρισμο... και θα ελεγα πως εχουν και μια πολυ ωραια μεσαια περιοχη.
User avatar
Dr Pan K
Site Admin
Posts: 7870
Joined: Tue Mar 29, 2016 12:46 am

Re: Plinius Audio

Unread post #6 by Dr Pan K » Sat May 06, 2017 11:18 pm

amanida wrote:Ωραία η παρουσίαση των μοντέλων της εταιρίας καθώς και η παράθεση ακουστικών εντυπώσεων.
Λείπει μόνο το Koru, το phono που βγάζει η εταιρία. Ο ήχος των ενισχυτικών plinius χαρακτηρίζεται to the warm side of neutral.


Να υποθέσω ότι ακούς με Plinius? Με τι ηχεία τους παίζεις?
Παναγιώτης
User avatar
amanida
Posts: 26
Joined: Wed May 03, 2017 7:11 pm

Re: Plinius Audio

Unread post #7 by amanida » Sun May 07, 2017 6:18 am

Dr Pan K wrote:
Να υποθέσω ότι ακούς με Plinius? Με τι ηχεία τους παίζεις?



Dynaudio Focus 340
User avatar
Dr Pan K
Site Admin
Posts: 7870
Joined: Tue Mar 29, 2016 12:46 am

Re: Plinius Audio

Unread post #8 by Dr Pan K » Sun May 07, 2017 10:36 am

amanida wrote:
Dr Pan K wrote:
Να υποθέσω ότι ακούς με Plinius? Με τι ηχεία τους παίζεις?



Dynaudio Focus 340


Τα περισσότερα 340 έχουν κυκλοφορήσει σε καφέ αλλά τα δικά σου είναι μαύρη λακα, ε;

Νομίζω πολύ καλός συνδυασμός τα Dynaudio & Plinius. Σχετικά αυστηρό ηχείο με ελαφρώς ζεστό ενισχυτή, ότι πρέπει. Να μας το παρουσιάσεις το σύστημα κάποια στιγμή.
Παναγιώτης
User avatar
Dr Pan K
Site Admin
Posts: 7870
Joined: Tue Mar 29, 2016 12:46 am

Re: Plinius Audio

Unread post #9 by Dr Pan K » Sat Jun 17, 2017 10:24 am

Μετα απο αρκετα χρόνια η Plinius αποσύρει τον SA-Ref και τον αντικαθιστά με νεο μοντελο, τον Α-300. Τεχνικα χαρακτηριστικά δεν εχουμε ακομα, απο εμφάνιση παραμένει κλασσικός αλλα και ανανεωμένος.

A-300 front.jpg
A-300 front.jpg (29.34 KiB) Viewed 4846 times
Παναγιώτης

Return to “Ενισχυτές”



Login · Register