Qing Yi Lun G&W University Tsinghua T-2.2A Class A tube amplifier
Posted: Sun Dec 12, 2021 2:26 pm
Μόλις χθες αγόρασα τον παραπάνω ενισχυτή ακουστικών.
Είναι μεγάλη ιστορία πως τον απέκτησα, αλλά είναι καινούργιος και άστρωτος βασικά.
Δυστυχώς δεν υπάρχουν πληροφορίες σε φόρα.
Τεχνικά χαρακτηριστικά δίνονται μονάχα σε ένα δύο site που τον πουλάνε.
Features:
a) the classical one common cathode line amplification, so that the shortest signal path.
b) The 3.2W power amplifier pentode do.
c) blue plastic package using high-end Japanese ALPS potentiometer.
d) imported 70 um thick copper thin double-sided printed circuit board.
e) The gold-plated solid copper knob.
f) using pure precious pear wood deluxe panel, laser engraving, unique artistic charm.
g) chassis with brushed stainless steel manufacturing.
h) EI-type core made of imported high-quality power transformers, power of 80W.
i) The German gold FRAKO, such as fever, red WIMA capacitors.
j) slow start delay using high-voltage DC power to extend tube life.
k) imported iron core choke inductors to do filtering.
l) Power has a mute function, delay 20 seconds into working condition.
m) 60 ~ 600 can promote high-end headphones.
n) particularly suitable for use tube pre-amplifier circuit, the gain of about 20dB to promote any pure vacuum tube and transistor-level power amplifier can achieve after the very good results.
o) The tube model: inlet tube 12AT7 (ECC81); inlet tube 6P14 (EL84).
Specifications:
Input Sensitivity: 220mV
Frequency response: 16Hz ~ 117KHz (-1dB)
Harmonic Distortion: 0.05% (VRMS: 1V; 1KHz)
Signal to Noise Ratio: 101dB (output VRMS: 15V for the reference value)
Adapter headphone impedance: 60 ohm ~ 600 ohm high-end headphones
Static power consumption: about 36W
Tube: 12AT7 (ECC81); 6P14 (EL84).
Dimension: 380 × width 220 × depth 120mm high
Net weight: 7kg
Gross weight: 8.5kg
Power supply: 110/220V
Θα μπορούσε κάποιος να με διαφωτίσει πως ακριβώς λειτουργεί η τοπολογία των 12AT7 (ECC81) και 6P14 (EL84), διότι είμαι άσχετος από λάμπες, και αν θα με συμβουλεύατε για tube rolling (οκ το ξέρω ακόμα δεν τον πήρα και αρχίσαμε τα πειράγματα). Είναι προενισχύτρια η 12ΑΤ7 και οι δύο EL84 ενισχύτριες για το κάθε κανάλι?
Πάντως στις σύντομες ακροάσεις φαίνεται να έχει και ευφωνικότητα και έκταση και να μην λείπει η δύναμη, τουλάχιστον στα Sennheiser HD800 παίζει άψογα.
ΥΓ. Το μόνο που βρήκα από την κατασκευάστρια εταιρία είναι το παρακάτω λινκ αλλά δεν λέει τίποτα απλά ότι το νέο μοντέλο έχει ασημένια πρόσοψη και τοροιδή μετασχηματιστή. http://www.gwtsinghua.com/Article/produ ... 309/8.html
Είναι μεγάλη ιστορία πως τον απέκτησα, αλλά είναι καινούργιος και άστρωτος βασικά.
Δυστυχώς δεν υπάρχουν πληροφορίες σε φόρα.
Τεχνικά χαρακτηριστικά δίνονται μονάχα σε ένα δύο site που τον πουλάνε.
Features:
a) the classical one common cathode line amplification, so that the shortest signal path.
b) The 3.2W power amplifier pentode do.
c) blue plastic package using high-end Japanese ALPS potentiometer.
d) imported 70 um thick copper thin double-sided printed circuit board.
e) The gold-plated solid copper knob.
f) using pure precious pear wood deluxe panel, laser engraving, unique artistic charm.
g) chassis with brushed stainless steel manufacturing.
h) EI-type core made of imported high-quality power transformers, power of 80W.
i) The German gold FRAKO, such as fever, red WIMA capacitors.
j) slow start delay using high-voltage DC power to extend tube life.
k) imported iron core choke inductors to do filtering.
l) Power has a mute function, delay 20 seconds into working condition.
m) 60 ~ 600 can promote high-end headphones.
n) particularly suitable for use tube pre-amplifier circuit, the gain of about 20dB to promote any pure vacuum tube and transistor-level power amplifier can achieve after the very good results.
o) The tube model: inlet tube 12AT7 (ECC81); inlet tube 6P14 (EL84).
Specifications:
Input Sensitivity: 220mV
Frequency response: 16Hz ~ 117KHz (-1dB)
Harmonic Distortion: 0.05% (VRMS: 1V; 1KHz)
Signal to Noise Ratio: 101dB (output VRMS: 15V for the reference value)
Adapter headphone impedance: 60 ohm ~ 600 ohm high-end headphones
Static power consumption: about 36W
Tube: 12AT7 (ECC81); 6P14 (EL84).
Dimension: 380 × width 220 × depth 120mm high
Net weight: 7kg
Gross weight: 8.5kg
Power supply: 110/220V
Θα μπορούσε κάποιος να με διαφωτίσει πως ακριβώς λειτουργεί η τοπολογία των 12AT7 (ECC81) και 6P14 (EL84), διότι είμαι άσχετος από λάμπες, και αν θα με συμβουλεύατε για tube rolling (οκ το ξέρω ακόμα δεν τον πήρα και αρχίσαμε τα πειράγματα). Είναι προενισχύτρια η 12ΑΤ7 και οι δύο EL84 ενισχύτριες για το κάθε κανάλι?
Πάντως στις σύντομες ακροάσεις φαίνεται να έχει και ευφωνικότητα και έκταση και να μην λείπει η δύναμη, τουλάχιστον στα Sennheiser HD800 παίζει άψογα.
ΥΓ. Το μόνο που βρήκα από την κατασκευάστρια εταιρία είναι το παρακάτω λινκ αλλά δεν λέει τίποτα απλά ότι το νέο μοντέλο έχει ασημένια πρόσοψη και τοροιδή μετασχηματιστή. http://www.gwtsinghua.com/Article/produ ... 309/8.html