audiohub.gr

Τα ενεργά ηχεία τα -ειδικά- τελευταία χρόνια έχουν βγεί απο τα studios και έχουν μπεί για τα καλά στο χώρο των οικιακών συστημάτων και αυτό εδώ το νήμα είναι αφιερωμένο σε τέτοιες υλοποιήσεις.

Υλοποιήσεις που σε αρκετές περιπτώσεις είναι state of the art σε ότι αφορά την κατασκευή, τις μονάδες αλλά και τα features μιας και ολοένα και αυξάνονται οι εταιρίες οι οποίες ενσωματώνουν και DACs, DSP, Βluetooth, Wi-Fi, ψηφιακές και μη εισόδους κλπ κλπ...


Καλή μας όρεξη!

ATC SCM50 ASLT






Overview:
ATC SM75-150 S Soft Dome Mid driver
Latest 234mm SL Spec Bass driver
Massive ATC motor assembly
Wide, even dispersion for pin-point imaging
350 watt class AB tri-amp pack
Active filters and overload protection

Specs:
Drivers: HF 25mm Neodymium, Mid 75mm ATC Soft Dome, LF 243mm SL
Frequency Response (±2dB): 70Hz–17kHz
Frequency Response (±6dB): 38Hz–22kHz
Matched Response: ±0.5dB
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Max SPL: 112dB
Crossover Frequencies: 380Hz & 3.5kHz
Connectors: Male XLR
Filters: Active – 4th Order Linkwitz-Riley, Passive – 2nd Order Linkwitz-Riley
Amplifier Output: 200w LF, 100w Mid, 50w HF (active version)
Cabinet Dimensions (HxWxD): 1003x304x470mm
Weight: 53.3kg


-------------------------- • --------------------------


Είτε το 40ρι είτε το 50ρι ενεργά της ATC θα ήθελα να είναι το επόμενο setup μου.
Μου τρέχουν τα σάλια!

B&O Beolab 90




Overview:

18 state-of-the-art Scan-Speak loudspeaker drivers
14 channels of ICE Power amplifiers
4 additional class D amplifiers
8200 total Watts of musical power and precision – per unit.


Features:

Analog Devices ADSP-21489 DSP
Burr-Brown PCM1798 Digital-to-Analog Converter
Texas Instruments PCM4220 Analogue-to-Digital Converter
Beam Width Control
Beam Direction Control
Resonance-based Sound Design
Phase-Optimised Filtering
Automatic Bass Linearisation (ABL) & Thermal Protection
Thermal Compression Compensation


Specs:

*Note: Total System measurements performed with Sound Design set to “Flat on-axis” and Active Room Compensation disabled.

Frequency Response: TBD (-10 dB, ref. 200 Hz - 2 kHz)

Frequency Range: TBD (-10 dB, ref. 200 Hz - 2 kHz)

Sensitivity:


*Unweighted Sound Pressure Level (SPL) of the BeoLab 90 at 1 m in a free field (200 Hz – 2 kHz). Input signal strength: 125 mV rms. Volume Step: 90. All other parameters set to Factory Defaults. Note that the input signal strength on the XLR input is measured between pins 2 and 3.

Maximum SPL: TBD (C) @ 1 m, on-axis

Self Noise (Digital input): TBD (A) @ 1 m, on-axis

Self Noise (Analogue input): TBD (A) @ 1 m, on-axis

Speaker Drivers:
Tweeter: 7 x Scan-Speak Illuminator 30 mm
Midrange: 7 x Scan-Speak Illuminator 86 mm
Woofer: 3 x Scan-Speak Discovery 212 mm
Front Woofer: 1 x Scan-Speak Revelator 260 mm

Amplifiers (custom designed for BeoLab 90):
For tweeters: 7 x Bang & Olufsen ICEpower AM300-X
For midrages: 7 x Bang & Olufsen ICEpower AM300-X
For woofers: 3 x Heliox AM1000-1
For front woofer: 1 x Heliox AM1000-1

Digital Signal Processor:
DSP type: 2 x Analogue Devices ADSP-21489 - 450 MHz
Sampling rate: 192 kHz fixed


Wireless Input (Master and Slave speaker):
• Wireless Power Link (24 bit / 48 kHz)
• WiSA (24 bit / 96 kHz)

Digital Input (Master speaker):
• USB Audio (24 bit / 192 kHz)
• S/P-DIF (24 bit / 192 kHz)
• Toslink (24 bit / 96 kHz)

KEF LS50 Wireless




Features:

Uni-Q technology
Crossover Timing Correction
Placement Flexibility using a selectable EQ tuned to compensate for different mounting scenarios
End-to-end 192kHz/24-bit high-resolution digital signal path, dedicated DAC per channel
Streaming pre-amplifier
230-watt x2 amplification in a bi-amp dual mono configuration
2.4GHz/5GHz Dual-band Wi-Fi
Bluetooth 4.0 with the aptX codec
Asynchronous USB Type B
TOSLINK Optical
RCA Analog
Touch Sensitive Control Panel
Remote Control
Dedicated iOS / Android App


Specs:

DRIVE UNITS
Uni-Q driver array:
HF: 25mm (1in.) vented aluminium dome
LF/MF: 130mm (5.25in.) magnesium/aluminium alloy

FREQUENCY RANGE
(-6dB) Measured at 85dB/1m
40Hz – 47kHz (More bass extension)
43Hz – 47kHz (Standard)
46Hz – 47kHz (Less bass extension)
Depending on speaker settings

FREQUENCY RESPONSE
(±3dB) Measured at 85dB/1m
45Hz – 28kHz (More bass extension)
50Hz – 28kHz (Standard)
61Hz – 28kHz (Less bass extension)
Depending on speaker settings

MAXIMUM OUTPUT (SPL)
106dB

INPUTS
2.4GHz/5GHz Dual-band Wi-Fi network
Bluetooth 4.0 with aptX® codec
USB Type B
TOSLINK Optical
RCA Analog Line Level Input
10/100 Mbps RJ45 Ethernet (For network and service)

OUTPUT
Subwoofer output

AMPLIFIER OUTPUT POWER
LF: 200W HF: 30W

BLUETOOTH RANGE
10m

BLUETOOTH MEMORY
8 devices

RESOLUTION
Up to 24bit
Depending on source resolution

SAMPLING RATE
Up to 192kHz (USB Type B)
Up to 96kHz (TOSLINK Optical)
Depending on source resolution

WI-FI NETWORK STANDARD
IEEE 802.11a/b/g/n

WI-FI NETWORK FREQUENCY BAND
Dual-band 2.4GHz/ 5 GHz

POWER INPUT
100 – 240VAC 50/60Hz

Δεν αναφερθήκαμε στα go to desktop monitor, τα PM της Fostex.

PM0.4
2way bass reflex
Low range driver: 100 mm (4 inch) cone speaker (υπαρχει και 5")
High range driver: 19 mm (3/4 inch) soft dome tweeter
Frequency characteristic: 60 Hz to 20 kHz
Crossover frequency: 1.6 kHz
Input terminal: RCA pin jack, 320 mV (input sensitivity)
Input impedance: 10 kΩ or more
Rated output: 30 W + 30 W (το μεγαλύτερο εχει λιγο ισχυρότερη ενισχυση)
Distortion factor (THD): Less than 0.05% (2 W output)

Focal Trio6 Be






Overview:
- Two monitors in one with remote switching: a quick and effective way to compare the mix translated to a compromised speaker system

- Beryllium inverted dome tweeter: state-of-the-art speaker design and material producing wide
uncompromised dynamics, linearity, and wide dispersion

- W composite sandwich cone: state-of-the-art speaker material producing a neutral, distortion-free sound

- Rotating baffle: facilitates both horizontal and vertical setups

- LF and HF shelving, 160Hz EQ: simplifies room integration

- 115dB peak @ 1m: high SPL accommodates all musical styles

- Remote pedal (not supplied) switching for FOCUS mode (two-way or three-way configuration)

- Three control knobs for adjusting low and high frequencies and 160Hz notch

Specs:
Frequency response
3-way mode: 35Hz - 40kHz (+/- 3dB)
2-way mode (Focus): 90Hz - 20kHz (+/- 3dB)

Maximum SPL
3-way mode: 115dB SPL (peak at 1m)
2-way mode (Focus): 105dB SPL (peak at 1m)

Bass
200W, class G

Midrange
150W, class G

Treble
100W, class AB

Indicators and controls at rear panel
• Input sensitivity selector (+4dBu/-10dBV)
• Low frequency shelving (+/- 3dB from 35 to 250Hz)
• High frequency shelving (+/- 3dB from 4.5 to 40kHz)
• EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
• FOCUS input / FOCUS output

Transducers
• Subwoofer 8W64701 -- 8" Focal driver with W composite sandwich cone
• Woofer 5W04701 -- 5" Focal driver with W composite sandwich cone
• Tweeter TB872 -- 1" Focal pure Beryllium inverted dome tweeter

Structure
22mm (0.86") reinforced panels

Finish
Black Textured side panel, Grey Textured body

Dimensions including 4 rubber feet (HxWxD)
520mm x 278mm x 360mm

Weight
20 kg